Editors Pick:
Untitled Document
Tamiya 1 10 The Hornet RTR
Retail Price $288
(Click More Info to view today's low price)
Tamiya new-again Expert Built ready-to-run version uses the exact same chassis and parts as the original. The only difference is the addition of an electronic speed control. Chassis: Bathtub type, ABS resin construction Drive: Rear wheel Motor: 540 type Radio: Tamiya Expec 2-channel, 27MHz AM pistol grip with steering and throttle trim and standard size steering servo Speed Control: TEU-101BK electronic speeed control with reverse Body: Highly detailed polycarbonate, molded in black with decals, clear side windows, removeable rear wing, driver figure and non-functional headlights Wheels: 5-spoke white plastic Front, 0.75" (19mm) wide, 1.5" (38mm) diameter, Rear, 1.4" (36mm) wide, 1.5" (38mm) diameter Tires: Front, straight ribbed Diameter: 2.9" (73mm), Width: 0.79" (20mm). Rear spiked, Diameter 3" (77mm), Width: 1.6" (41mm). Gearbox: Sealed with differential. Shocks: Friction front, oil filled rear. Bumper: Front, reinforced resin construction. Suspension: Front wheel independent, non-adjustable. Tansmission: Single speed. Camber Tie Rods: Fixed, non-adjustable, Steering Tie Rods: Fixed, non-adjustable Steering: Bell-crank type. Servo Saver: Included. Fully assembled Tamiya Hornet buggy, electronic speed control, 540 motor, pistol grip radio, steering servo, body with wing and driver figure, tube of grease, instruction manual and parts list
User comment: I’ve owned other ones before and was very very happy.
Related Products You May Want to Consider:
Editors Rating:
Untitled Document
Tamiya XB The Grasshopper RTR
Retail Price $244
(Click More Info to view today's low price)
FEATURES: Chassis: ABS resin, tub-type chassis Drive: 2WD, rear drive Motor: 380 size electric Full metal bushings Radio: Tamiya 2-Ch Expec SP Shocks: Friction shocks (not oil filled) Gearbox: Closed Differentials: Gear type diff Tires: Ribbed front Sand paddle Rear Wheels: 1.6" (41mm) diameter, white five spoke wheels Speed Control: Tamiya electronic TEU-101BK, TAM M3194. Bumpers: Reinforced resin front bumper Suspension: Front swing axle type Rear straight axle with differential Camber Tie Rods: Fixed, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Direct-to-servo with servo saver Servo Saver: included (if this applies) INCLUDES: One Grasshopper rolling chassis with friction shocks, 380 motor, rigid white body, five spoke wheels, front ribbed tires, rear sand paddle tires, 18 tooth pinion gear, 50 tooth spur gear, 2-channel radio and instructions. _ REQUIRES: Radio Batteries: (8) AA Size Battery: 6 cell flat w/ standard connector Charger: AC/DC timed or peak for 6-cell battery Paint: Required for painting driver and accessories Misc. Items: Building and track equipment SPECS: VEHICLE- Length: 15.3" (389mm) Width: 8.8" (223mm) Height: 5.3" (135mm) Weight: 1.8 lbs (830g) Tires: .87" x 2.9" (22mm x 74mm) width x diameter 1.6" x 3.2" (41mm x 81mm) width x diameter COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Bearing Set Qty. (9) 5 x 11mm Wheels and gearbox, (1) 5 x 8mm Counter Gear. Body pictured on the box is painted white (molded in color) Body/Driver figure can be painted with model paint
Editors Rating:
Untitled Document
Tamiya Porsche 911 GT3 Cup VIP 07 TT 01E RTR
Retail Price $380
(Click More Info to view today's low price)
Tamiya Porsche is the Expert Built Version. Newly designed TT-01 type E chassis features brand new A Parts (Uprights) and D Parts (Upper Deck). A Parts are made from durable polycarbonate plastic material while D Parts are made from feberglass-reinforced nylon material for greater strength. These parts are now also separately molded to enable easier maintenance (regular TT-01 had damper stay and gear case molded as one piece). Improved steering linkage design features TA05 steering posts for sharper steering response. New upper deck enhances chassis rigidity and mimics Tamiya's high-level race-spec machines. Upper deck also features a convenient transponder mount to further encourage fans to go to their local track and experience R/C racing. Rear suspension arms installed in reverse position to create shorter wheel base for greater scale accuracy. 4WD shaft-driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear gearboxes. Unmistakable Porsche 911 fully painted body is accurately reproduced with lightweight polycarbonate. 2-Channel R/C system, TEU-101BK ESC, Type 540 motor, and LEDs for headlights and tail lights are all included.
Editors Rating:
Untitled Document
Tamiya XB Lunch Box RTR
Retail Price $284
(Click More Info to view today's low price)
FEATURES: Chassis: Resin Drive: Two wheel rear drive Motor: 540 motor with pre-attached leads Radio: Tamiya Expec SP AM pistol grip Plastic and metal bushings Shocks: Four friction, plastic body Body: Shock resistant styrol pre-trimmed and painted with pre-applied decals, full size late '70s - early '80s full size van Gearbox: Sealed Differential: Rear Transmission: Single speed Wheels: One-piece plastic, yellow in color Tires: 4.5" (115mm) diameter treaded monster tires Speed Control: TEU-101BK Electronic Speed Control with reverse, TAM M3194 Bumpers: Front plastic Suspension: Four wheel independent double wishbone Camber Tie Rods: Adjustable Steering Tie Rods: Adjustable Steering: Bell-crank type Servo Saver: Included INCLUDES: Tamiya LunchBox w/oil type shocks, 540 size motor, electronic speed control, painted body, tires, wheels front bumper, pinion gear, spur gear, and instructions _ REQUIRES: Radio Batteries: 8 AA size Battery: 6 flat pack with standard connector Charger: AC/DC timed or peak for 6-cell battery Misc. Items: Building and track equipment SPECS: VEHICLE- Length: 14" (356mm) Width: 4.5" (114mm) Height: 9" (229mm)
|
|
|
|
|
|
|
|
